Clean. But could be better, waiting for the rest of our miners and set up to arrive to clean up wire management! #crypto #cryptomining #monero #xmr #mining #cryptocurrency #bitcoin #ethereum #eth #btc #cloudmining #hosting #amd #vega #amdrx #rx #rxvega #vega56 #xfx #powercolor #gigabyte #asus #gtx
Why Amaury's stunt is clever, why it's a potentially recurring problem, and what can be done about it
TLDR: this isn't an Amaury problem, it's an incentive problem. If BCH splits and the ABC token retains even some residual value, then we're likely to see future "IFP splits" in other tokens and possibly BCH again. Here's my take on The Amaury Situation. I think he wants to get out of dealing with BCH and leading the ABC team. I think he's over it. I think he wants to go do something different. He could quit and walk away. But why do that, when he could create a perpetual income stream for himself as well? "Dead" coins hold value A lot of people here seem to think the ABC split will be worthless. I disagree. It will have significant value: Let's assume ABC is only worth $20. Even under this assumption, Amaury stands to get $10 every ten minutes in perpetuity - for doing absolutely nothing. That's $60/hr. (x 24 hours, or $1440/day) in mail money. That's a decent wage - a perpetual income stream (annuity) - with literally no work required. But I think $20 is super low. Tokens strangely hold value long after the token appears dead. For example LTC is still worth about $50 - and that's AFTER it's champion announced it was a dead project and all the devs left (and LTC is much less scarce than BCH). FFS even BSV is worth $150 and the entire cryptosphere agrees its a scamtoken run by a con artist. If LTC and BSV can do it, so can ABC. I predict ABC token will hold significant value. If the ABC token can hold $50/coin, then Amaury looks to collect $150/hr. (x24 hrs - $3600/day). If it can hold $100/coin, then Amaury gets $300/hr (x24 hrs - ie $7200/day). But even if it drops to $10/token, he still gets $720 every day. For doing nothing. Why is this a problem This is a serious problem with our incentives. If he succeeds, Amaury will have piloted a repeatable exit-scam recipe for any reference implementation. "Tired of supporting your halfass token and ragtag devs? Here's an easy escape hatch! Just create a version that pays you a nice annuity, let the token split, and retire with your annuity." That's the problem. Amaury doesn't have to keep the ticker. He just has to successfully split the token into two tradeable tokens, and he wins his annuity. What can be done I'm not sure. I want Amaury to lose here. I want him to get zero annuity. I want to send a clear signal to the next Amaury that splitting the token in order to collect your annuity is a losing strategy. But I can't see how to accomplish this. One way would be to attack his chain through reorgs. But there is no direct incentive for miners to do this. And I don't support the notion that "bitcoin works because miners attack chains they don't support." Another would be to try to drive the value of his token to zero. But that's basically impossible. I think it will be very hard to drive the value of his token even to $20. And at even $20 he gets a nice little annuity. Not a get rich quick scheme by any stretch, but still, it'll pay for a nice mortgage. I know I wouldn't turn down the chance to get an extra grand per day of mail money. So even at $20/token, Amaury will have demonstrated that his easy retirement plan will work. We need $2/token if we want to declare his strategy an unqualified failure. We can't. And the problem here is that if/when BCHN (or anyone else) becomes the reference client, then its leaders will have the exact same incentive to cause a split when they're tired of managing the project and want out. Conclusion Amaury has surfaced a possible gaping vulnerability in the incentive system which creates a perverse incentive to continually create "IFP" type splits. This vulnerability exists in all bitcoin-like tokens. Unless we can find a way to completely block Amaury from his expected revenue stream, he will be setting a precedence that we can expect to see repeated on other tokens and possibly even on BCH again one day. Edit: I wanted to point out that dskloet has reminded us there is a third option, and that is that instead of allowing Amaury to split the coin, we can soft-fork ABC in such a way that ABC considers the blocks to be valid, but the IFP funds are unusable. The obvious way to do this (as dskloet pointed out) is to blacklist the IFP address. But blacklisting has its own consequences. Another way to do this might be to do something like make the coins sent to that address "unmovable" so that ABC clients will see the blocks paying to IFP and therefore valid, but he can't spend the money. Edit: to clarify
What's the difference between blacklisting and making the coins unmovable? Isn't that exactly what blacklisting is?
Blacklisting means not accepting transactions from address X. I propose instead sending "fake coins" to address X. Like putting slugs into a coin-op machine. The machine owner can still try to spend the slugs, but nobody will take them. But the machine owner can still spend any valid tokens spent in the machine.
The underrated stock survey! Submit your picks for the community to track
Following on the previous tracking post (http://redd.it/i2mmzg) and the highly upvoted request from DJ-Ascii , I've set up this post for another round of underrated or undervalued stock picks. As before, let us know what stock you believe is underrated and a consistent winner that has done well for you, or you believe will do well going forward. In order to make this easier to track please use the following guidelines for submitting.
Only one submission per comment. You can make multiple comments, but please only submit one stock per comment.
Please include at least the ticker and the company name. Feel free to explain why you think this is a good stock.
I'll add these new picks alongside the old survey so as to update you on each portfolio over time. Don't worry about any overlaps. Edit 1: I've compiled everyone who has posted so far, but I'll look out for any final additions tomorrow. The list will then be locked EOD on Friday the 7th of August, and all prices will start from there. Edit 2: All picks have now been locked down and consolidated into the list below. Stocks are sorted in alphabetical order of their company name and the ID corresponds to the approximate order in which they were submitted. The next update will be in 30 days.
A common sentiment is brewing online; a shared desire for the internet that might have been. After decades of corporate encroachment, you don't need to be a power user to realize that something has gone very wrong. In the early days of the internet, the future was bright. In that future, when you sent an instant message, it traveled directly to the recipient. When you needed to pay a friend, you announced a transfer of value to their public key. When an app was missing a feature you wanted, you opened up the source code and implemented it. When you took a picture on your phone, it was immediately encrypted and backed up to storage that you controlled. In that future, people would laugh at the idea of having to authenticate themselves to some corporation before doing these things. What did we get instead? Rather than a network of human-sized communities, we have a handful of enormous commons, each controlled by a faceless corporate entity. Hey user, want to send a message? You can, but we'll store a copy of it indefinitely, unencrypted, for our preference-learning algorithms to pore over; how else could we slap targeted ads on every piece of content you see? Want to pay a friend? You can—in our Monopoly money. Want a new feature? Submit a request to our Support Center and we'll totally maybe think about it. Want to backup a photo? You can—inside our walled garden, which only we (and the NSA, of course) can access. Just be careful what you share, because merely locking you out of your account and deleting all your data is far from the worst thing we could do. You rationalize this: "MEGACORP would never do such a thing; it would be bad for business." But we all know, at some level, that this state of affairs, this inversion of power, is not merely "unfortunate" or "suboptimal" – No. It is degrading. Even if MEGACORP were purely benevolent, it is degrading that we must ask its permission to talk to our friends; that we must rely on it to safeguard our treasured memories; that our digital lives are completely beholden to those who seek only to extract value from us. At the root of this issue is the centralization of data. MEGACORP can surveil you—because your emails and video chats flow through their servers. And MEGACORP can control you—because they hold your data hostage. But centralization is a solution to a technical problem: How can we make the user's data accessible from anywhere in the world, on any device? For a long time, no alternative solution to this problem was forthcoming. Today, thanks to a confluence of established techniques and recent innovations, we have solved the accessibility problem without resorting to centralization. Hashing, encryption, and erasure encoding got us most of the way, but one barrier remained: incentives. How do you incentivize an anonymous stranger to store your data? Earlier protocols like BitTorrent worked around this limitation by relying on altruism, tit-for-tat requirements, or "points" – in other words, nothing you could pay your electric bill with. Finally, in 2009, a solution appeared: Bitcoin. Not long after, Sia was born. Cryptography has unleashed the latent power of the internet by enabling interactions between mutually-distrustful parties. Sia harnesses this power to turn the cloud storage market into a proper marketplace, where buyers and sellers can transact directly, with no intermediaries, anywhere in the world. No more silos or walled gardens: your data is encrypted, so it can't be spied on, and it's stored on many servers, so no single entity can hold it hostage. Thanks to projects like Sia, the internet is being re-decentralized. Sia began its life as a startup, which means it has always been subjected to two competing forces: the ideals of its founders, and the profit motive inherent to all businesses. Its founders have taken great pains to never compromise on the former, but this often threatened the company's financial viability. With the establishment of the Sia Foundation, this tension is resolved. The Foundation, freed of the obligation to generate profit, is a pure embodiment of the ideals from which Sia originally sprung. The goals and responsibilities of the Foundation are numerous: to maintain core Sia protocols and consensus code; to support developers building on top of Sia and its protocols; to promote Sia and facilitate partnerships in other spheres and communities; to ensure that users can easily acquire and safely store siacoins; to develop network scalability solutions; to implement hardforks and lead the community through them; and much more. In a broader sense, its mission is to commoditize data storage, making it cheap, ubiquitous, and accessible to all, without compromising privacy or performance. Sia is a perfect example of how we can achieve better living through cryptography. We now begin a new chapter in Sia's history. May our stewardship lead it into a bright future.
Today, we are proposing the creation of the Sia Foundation: a new non-profit entity that builds and supports distributed cloud storage infrastructure, with a specific focus on the Sia storage platform. What follows is an informal overview of the Sia Foundation, covering two major topics: how the Foundation will be funded, and what its funds will be used for.
The Sia Foundation will be structured as a non-profit entity incorporated in the United States, likely a 501(c)(3) organization or similar. The actions of the Foundation will be constrained by its charter, which formalizes the specific obligations and overall mission outlined in this document. The charter will be updated on an annual basis to reflect the current goals of the Sia community. The organization will be operated by a board of directors, initially comprising Luke Champine as President and Eddie Wang as Chairman. Luke Champine will be leaving his position at Nebulous to work at the Foundation full-time, and will seek to divest his shares of Nebulous stock along with other potential conflicts of interest. Neither Luke nor Eddie personally own any siafunds or significant quantities of siacoin.
The primary source of funding for the Foundation will come from a new block subsidy. Following a hardfork, 30 KS per block will be allocated to the "Foundation Fund," continuing in perpetuity. The existing 30 KS per block miner reward is not affected. Additionally, one year's worth of block subsidies (approximately 1.57 GS) will be allocated to the Fund immediately upon activation of the hardfork. As detailed below, the Foundation will provably burn any coins that it cannot meaningfully spend. As such, the 30 KS subsidy should be viewed as a maximum. This allows the Foundation to grow alongside Sia without requiring additional hardforks. The Foundation will not be funded to any degree by the possession or sale of siafunds. Siafunds were originally introduced as a means of incentivizing growth, and we still believe in their effectiveness: a siafund holder wants to increase the amount of storage on Sia as much as possible. While the Foundation obviously wants Sia to succeed, its driving force should be its charter. Deriving significant revenue from siafunds would jeopardize the Foundation's impartiality and focus. Ultimately, we want the Foundation to act in the best interests of Sia, not in growing its own budget.
The Foundation inherits a great number of responsibilities from Nebulous. Each quarter, the Foundation will publish the progress it has made over the past quarter, and list the responsibilities it intends to prioritize over the coming quarter. This will be accompanied by a financial report, detailing each area of expenditure over the past quarter, and forecasting expenditures for the coming quarter. Below, we summarize some of the myriad responsibilities towards which the Foundation is expected to allocate its resources.
Maintain and enhance core Sia software
Arguably, this is the most important responsibility of the Foundation. At the heart of Sia is its consensus algorithm: regardless of other differences, all Sia software must agree upon the content and rules of the blockchain. It is therefore crucial that the algorithm be stewarded by an entity that is accountable to the community, transparent in its decision-making, and has no profit motive or other conflicts of interest. Accordingly, Sia’s consensus functionality will no longer be directly maintained by Nebulous. Instead, the Foundation will release and maintain an implementation of a "minimal Sia full node," comprising the Sia consensus algorithm and P2P networking code. The source code will be available in a public repository, and signed binaries will be published for each release. Other parties may use this code to provide alternative full node software. For example, Nebulous may extend the minimal full node with wallet, renter, and host functionality. The source code of any such implementation may be submitted to the Foundation for review. If the code passes review, the Foundation will provide "endorsement signatures" for the commit hash used and for binaries compiled internally by the Foundation. Specifically, these signatures assert that the Foundation believes the software contains no consensus-breaking changes or other modifications to imported Foundation code. Endorsement signatures and Foundation-compiled binaries may be displayed and distributed by the receiving party, along with an appropriate disclaimer. A minimal full node is not terribly useful on its own; the wallet, renter, host, and other extensions are what make Sia a proper developer platform. Currently, the only implementations of these extensions are maintained by Nebulous. The Foundation will contract Nebulous to ensure that these extensions continue to receive updates and enhancements. Later on, the Foundation intends to develop its own implementations of these extensions and others. As with the minimal node software, these extensions will be open source and available in public repositories for use by any Sia node software. With the consensus code now managed by the Foundation, the task of implementing and orchestrating hardforks becomes its responsibility as well. When the Foundation determines that a hardfork is necessary (whether through internal discussion or via community petition), a formal proposal will be drafted and submitted for public review, during which arguments for and against the proposal may be submitted to a public repository. During this time, the hardfork code will be implemented, either by Foundation employees or by external contributors working closely with the Foundation. Once the implementation is finished, final arguments will be heard. The Foundation board will then vote whether to accept or reject the proposal, and announce their decision along with appropriate justification. Assuming the proposal was accepted, the Foundation will announce the block height at which the hardfork will activate, and will subsequently release source code and signed binaries that incorporate the hardfork code. Regardless of the Foundation's decision, it is the community that ultimately determines whether a fork is accepted or rejected – nothing can change that. Foundation node software will never automatically update, so all forks must be explicitly adopted by users. Furthermore, the Foundation will provide replay and wipeout protection for its hard forks, protecting other chains from unintended or malicious reorgs. Similarly, the Foundation will ensure that any file contracts formed prior to a fork activation will continue to be honored on both chains until they expire. Finally, the Foundation also intends to pursue scalability solutions for the Sia blockchain. In particular, work has already begun on an implementation of Utreexo, which will greatly reduce the space requirements of fully-validating nodes (allowing a full node to be run on a smartphone) while increasing throughput and decreasing initial sync time. A hardfork implementing Utreexo will be submitted to the community as per the process detailed above. As this is the most important responsibility of the Foundation, it will receive a significant portion of the Foundation’s budget, primarily in the form of developer salaries and contracting agreements.
Support community services
We intend to allocate 25% of the Foundation Fund towards the community. This allocation will be held and disbursed in the form of siacoins, and will pay for grants, bounties, hackathons, and other community-driven endeavours. Any community-run service, such as a Skynet portal, explorer or web wallet, may apply to have its costs covered by the Foundation. Upon approval, the Foundation will reimburse expenses incurred by the service, subject to the exact terms agreed to. The intent of these grants is not to provide a source of income, but rather to make such services "break even" for their operators, so that members of the community can enrich the Sia ecosystem without worrying about the impact on their own finances.
Ensure easy acquisition and storage of siacoins
Most users will acquire their siacoins via an exchange. The Foundation will provide support to Sia-compatible exchanges, and pursue relevant integrations at its discretion, such as Coinbase's new Rosetta standard. The Foundation may also release DEX software that enables trading cryptocurrencies without the need for a third party. (The Foundation itself will never operate as a money transmitter.) Increasingly, users are storing their cryptocurrency on hardware wallets. The Foundation will maintain the existing Ledger Nano S integration, and pursue further integrations at its discretion. Of course, all hardware wallets must be paired with software running on a computer or smartphone, so the Foundation will also develop and/or maintain client-side wallet software, including both full-node wallets and "lite" wallets. Community-operated wallet services, i.e. web wallets, may be funded via grants. Like core software maintenance, this responsibility will be funded in the form of developer salaries and contracting agreements.
Protect the ecosystem
When it comes to cryptocurrency security, patching software vulnerabilities is table stakes; there are significant legal and social threats that we must be mindful of as well. As such, the Foundation will earmark a portion of its fund to defend the community from legal action. The Foundation will also safeguard the network from 51% attacks and other threats to network security by implementing softforks and/or hardforks where necessary. The Foundation also intends to assist in the development of a new FOSS software license, and to solicit legal memos on various Sia-related matters, such as hosting in the United States and the EU. In a broader sense, the establishment of the Foundation makes the ecosystem more robust by transferring core development to a more neutral entity. Thanks to its funding structure, the Foundation will be immune to various forms of pressure that for-profit companies are susceptible to.
Drive adoption of Sia
Although the overriding goal of the Foundation is to make Sia the best platform it can be, all that work will be in vain if no one uses the platform. There are a number of ways the Foundation can promote Sia and get it into the hands of potential users and developers. In-person conferences are understandably far less popular now, but the Foundation can sponsor and/or participate in virtual conferences. (In-person conferences may be held in the future, permitting circumstances.) Similarly, the Foundation will provide prizes for hackathons, which may be organized by community members, Nebulous, or the Foundation itself. Lastly, partnerships with other companies in the cryptocurrency space—or the cloud storage space—are a great way to increase awareness of Sia. To handle these responsibilities, one of the early priorities of the Foundation will be to hire a marketing director.
The Foundation Fund will be controlled by a multisig address. Each member of the Foundation's board will control one of the signing keys, with the signature threshold to be determined once the final composition of the board is known. (This threshold may also be increased or decreased if the number of board members changes.) Additionally, one timelocked signing key will be controlled by David Vorick. This key will act as a “dead man’s switch,” to be used in the event of an emergency that prevents Foundation board members from reaching the signature threshold. The timelock ensures that this key cannot be used unless the Foundation fails to sign a transaction for several months. On the 1st of each month, the Foundation will use its keys to transfer all siacoins in the Fund to two new addresses. The first address will be controlled by a high-security hot wallet, and will receive approximately one month's worth of Foundation expenditures. The second address, receiving the remaining siacoins, will be a modified version of the source address: specifically, it will increase the timelock on David Vorick's signing key by one month. Any other changes to the set of signing keys, such as the arrival or departure of board members, will be incorporated into this address as well. The Foundation Fund is allocated in SC, but many of the Foundation's expenditures must be paid in USD or other fiat currency. Accordingly, the Foundation will convert, at its discretion, a portion of its monthly withdrawals to fiat currency. We expect this conversion to be primarily facilitated by private "OTC" sales to accredited investors. The Foundation currently has no plans to speculate in cryptocurrency or other assets. Finally, it is important that the Foundation adds value to the Sia platform well in excess of the inflation introduced by the block subsidy. For this reason, the Foundation intends to provably burn, on a quarterly basis, any coins that it cannot allocate towards any justifiable expense. In other words, coins will be burned whenever doing so provides greater value to the platform than any other use. Furthermore, the Foundation will cap its SC treasury at 5% of the total supply, and will cap its USD treasury at 4 years’ worth of predicted expenses. Addendum: Hardfork Timeline We would like to see this proposal finalized and accepted by the community no later than September 30th. A new version of siad, implementing the hardfork, will be released no later than October 15th. The hardfork will activate at block 293220, which is expected to occur around 12pm EST on January 1st, 2021.
Addendum: Inflation specifics The total supply of siacoins as of January 1st, 2021 will be approximately 45.243 GS. The initial subsidy of 1.57 GS thus increases the supply by 3.47%, and the total annual inflation in 2021 will be at most 10.4% (if zero coins are burned). In 2022, total annual inflation will be at most 6.28%, and will steadily decrease in subsequent years.
We see the establishment of the Foundation as an important step in the maturation of the Sia project. It provides the ecosystem with a sustainable source of funding that can be exclusively directed towards achieving Sia's ambitious goals. Compared to other projects with far deeper pockets, Sia has always punched above its weight; once we're on equal footing, there's no telling what we'll be able to achieve. Nevertheless, we do not propose this change lightly, and have taken pains to ensure that the Foundation will act in accordance with the ideals that this community shares. It will operate transparently, keep inflation to a minimum, and respect the user's fundamental role in decentralized systems. We hope that everyone in the community will consider this proposal carefully, and look forward to a productive discussion.
(please don't laugh at my spaghetti I know it's ugly but it works and my friend who works at Oracle says that means it's good enough to ship) No Mac or Linux support for the moment. Might maybe look into supporting them at some point if anybody really wants it, but I don't have a machine running either OS so I wouldn't be able to test it myself. Over the past few days I taught myself Python by slapping together a downloader for ElvUI that automates the entire download/installation process. I spent more time making this than I will ever save from not having to download/install it manually anymore, so I decided to open-source it and post it here so others can maybe benefit from the time that I wasted!
Autodetects your WoW installation directory - if you installed it normally via the Battle.net launcher, otherwise you can manually set your installation directory!
Supports both Retail and Classic in the same executable, AND remembers which game version(s) you want it to work with! Want it to handle ElvUI for Retail but you prefer the stock UI for Classic? No problem!
After first time setup is complete, every time you run the program it'll automatically download the latest version(s) of ElvUI for you and install them right to your Interface/Addons folder(s)!
Cleans up after itself by deleting the downloaded .zip files after extracting the contents to your game! This was definitely important enough to include in this list I am not just padding to make my garbage program seem more impressive.
Remembers the last build numbers it downloaded so it doesn't waste your precious bandwidth if there's no new update! This way if Classic is updated but not Retail it will only download for Classic, and vice versa.
Easily configurable without having to bother with the config file (located in %APPDATA%/Roaming/ElvUIDownloader ): just hit SHIFT during the 3-second window after launching before it starts to download anything (only options right now are install directory if it can't autodetect, and then downloading for Retail and/or Classic)!
Easy to completely uninstall if you absolutely hate it: run the config as described above, and then set it to not download for either game version (answer 'N' when prompted), and it will delete the configuration file so you can just delete the program and remove all trace of it from your machine exceptforthebitcoinminerIsomehowmanagedtohideina12.2MBexecutable
So long as the TukUI team doesn't change the download page, or change the naming convention for either file, or send me a cease and desist, this should continue to work forever! If I continue to update this I'd like to add a GUI of some sort so it at least looks nice. Perhaps with faction themed skins for you to look at for the 6 seconds the program's open. Lastly, as stated at the top of the post, I don't have the means to really add proper Mac/Linux support for the moment as I can't easily test any changes, but if someone wants to fork this and add it themselves then go for it! EDIT: 10 hours after posting I remembered to set the repo to public. My brain is nice and smooth today. Anyway in the comments some other (better) programs have been shared so you should probably use those instead but I'm still proud of my garbage so I'm keeping the post up.
https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/220.127.116.11 Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that. Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap. We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout. Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.
Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now. Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date. The transition height is also when the team requirement will be relaxed for the network.
Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.
The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use. There are so many goodies here it is hard to summarize them all. I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures. The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!
Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.
Network magnitude unit pinned to a static value of 0.25
Max research reward allowed per block raised to 16384 GRC (from 12750 GRC)
New CPIDs begin accruing research rewards from the first superblock that contains the CPID instead of from the time of the beacon advertisement
500 GRC research reward limit for a CPID's first stake
6-month expiration for unclaimed rewards
10-block spacing requirement between research reward claims
Rolling 5-day payment-per-day limit
Legacy tolerances for floating-point error and time drift
The need to include a valid copy of a CPID's magnitude in a claim
10-block emission adjustment interval for the magnitude unit
One-time beacon activation requires that participants temporarily change their usernames to a verification code at one whitelisted BOINC project
Verification codes of pending beacons expire after 3 days
Self-service beacon removal
Burn fee for beacon advertisement increased from 0.00001 GRC to 0.5 GRC
Rain addresses derived from beacon keys instead of a default wallet address
Beacon expiration determined as of the current block instead of the previous block
The ability for developers to remove beacons
The ability to sign research reward claims with non-current but unexpired beacons
As a reminder:
Beacons expire after 6 months pass (180 days)
Beacons can be renewed after 5 months pass (150 days)
Renewed beacons must be signed with the same key as the original beacon
Magnitudes less than 1 include two fractional places
Magnitudes greater than or equal to 1 but less than 10 include one fractional place
A valid superblock must match a scraper convergence
Superblock popularity election mechanics
Yes/no/abstain and single-choice response types (no user-facing support yet)
To create a poll, a maximum of 250 UTXOs for a single address must add up to 100000 GRC. These are selected from the largest downwards.
Burn fee for creating polls scaled by the number of UTXOs claimed
50 GRC for a poll contract
0.001 GRC per claimed UTXO
Burn fee for casting votes scaled by the number of UTXOs claimed
0.01 GRC for a vote contract
0.01 GRC to claim magnitude
0.01 GRC per claimed address
0.001 GRC per claimed UTXO
Maximum length of a poll title: 80 characters
Maximum length of a poll question: 100 characters
Maximum length of a poll discussion website URL: 100 characters
Maximum number of poll choices: 20
Maximum length of a poll choice label: 100 characters
Magnitude, CPID count, and participant count poll weight types
The ability for developers to remove polls and votes
[18.104.22.168] 2020-09-03, mandatory, "Fern"
Backport newer uint256 types from Bitcoin #1570 (@cyrossignol)
Implement project level rain for rainbymagnitude #1580 (@jamescowens)
Upgrade utilities (Update checker and snapshot downloadeapplication) #1576 (@iFoggz)
Provide fees collected in the block by the miner #1601 (@iFoggz)
Add support for generating legacy superblocks from scraper stats #1603 (@cyrossignol)
Port of the Bitcoin Logger to Gridcoin #1600 (@jamescowens)
Implement zapwallettxes #1605 (@jamescowens)
Implements a global event filter to suppress help question mark #1609 (@jamescowens)
Add next target difficulty to RPC output #1615 (@cyrossignol)
Add caching for block hashes to CBlock #1624 (@cyrossignol)
Make toolbars and tray icon red for testnet #1637 (@jamescowens)
Add an rpc call convergencereport #1643 (@jamescowens)
Implement newline filter on config file read in #1645 (@jamescowens)
Implement beacon status icon/button #1646 (@jamescowens)
Add gridcointestnet.png #1649 (@caraka)
Add precision to support magnitudes less than 1 #1651 (@cyrossignol)
Replace research accrual calculations with superblock snapshots #1657 (@cyrossignol)
Publish example gridcoinresearch.conf as a md document to the doc directory #1662 (@jamescowens)
Add options checkbox to disable transaction notifications #1666 (@jamescowens)
Add support for self-service beacon deletion #1695 (@cyrossignol)
Add support for type-specific contract fee amounts #1698 (@cyrossignol)
Add verifiedbeaconreport and pendingbeaconreport #1696 (@jamescowens)
Add preliminary testing option for block v11 height on testnet #1706 (@cyrossignol)
Add verified beacons manifest part to superblock validator #1711 (@cyrossignol)
Implement beacon, vote, and superblock display categories/icons in UI transaction model #1717 (@jamescowens)
Ryzen 1600x high idle temp because 3 cores are at full load
My airflow and the cpu cooler in general are pretty good, the cpu is overclocked to 4ghz and under full cinebench r20 load it doesnt even reach 70C but at idle my cpu will sit around 56C, after opening hwinfo or hwmonitor the temp checks out (Tdie) and it shows that thread 0,2 and 6 are at full 100% load. What could be causing this. Task manager doesnt show anything unordinary going on and the usage is <5% Computer Type: Custom dekstop GPU: Gainward Ghost RTX 2060 6GB CPU: 1600X 4.0GHz 1.35V Motherboard: ASRock AB350M RAM: Patriot Viper Steel 3400MHz 2x8GB 2nd and 4th slot. XMP set to 3200MHz PSU: Corsair CX650M Operating System & Version: Windows 10 Pro Version 2004 GPU Drivers: 452.06 Chipset Drivers: P5.50 Background Applications: Spotify, MSI Afterburner, Riva Statistic Tuner, NVIDIA Settings Troubleshooting: Tried removing the cpu overclock SOLVED: Trojan bitcoin miner deep in chrome folder
My personal experience with Innosilicon A10 Pro (6G) 500Mh ASIC ethash miner
EDIT : This is about the 5G version, not the 6G. Hello, Since there is not much consumers tests online about the Innosilicon A10 (Ethmaster) Pro (5G) at 500Mh, I decided to share my personal experience through an "anonymous" account. I bought it around April 2020, arrived in May but for personal reasons I was only able to turn it on this summer :( The A10 costs me 3242 € + 70 € power supply (Innosilicon 1400W Power Supply) + shipping. I will not reveal where I bought it because this is not an ad, but it was through an european ASIC miner reseller. I know Ethereum 2.0 is coming and I'm aware this is a gamble. I would not advise you to buy it now, especially knowing Eth 2.0 is really coming now, DeFi is pushing at the gates and I heard rumors there is a 750Mh version coming up. So, it is my first ASIC miner, I did some ZEC mining with a 4 x 1080Ti mining rig two years go.
EDIT : EthToDoge pointed out in the comments that the A10 isn't an ASIC technically speaking The A10 is basically a box crammed full of laptop GPUs and some custom firmware and made to look like the Bitcoin ASICS. [Check out the comments for more information]
The A10 mining chains reboots itself every 9 hours on average. When the A10 reboots, it goes into an autotuning mode which can take up to 2 hours, but usually around 1h. When in autotuning, it starts at 0Mh and goes to it's full speed after the autotuning, not mining much during this phase because the autotuning mode causes a lot of invalid shares, up to 20% and going down to 3% when tuning is completed. The chains temperature are around 63°C, I don't know if this is the reason of the reboot. I'll try later on to get a better air flow. I fixed the temperature issue I had by placing in a better ventilated location, temperature is now around 53°C but that didn't fixed the reboot issue. miner web interface, you can see the hashrate drop due to the random reboot Performancesettings I tried balanced and factory modes, and I didn't saw much differences in the reported speed. In a near future I'll have a try with theperformancemode but I will monitor the power consumption when trying since the A10 warns me to pay attention to that when I want to enable performancemode in the web interface. The performance mode consumes around 10% to 15% more electricity than the factory mode, without noticing any difference in the hashrate or stability. I didn't had proper tools to measure the power consumption, my A10 was plugged in an UPS and it's load went from 43% usage to 55% so I'm assuming the difference is the extra power consumption. Changing performance settings causes the miner to go into autotuning. Autoupdate The firmware check is working, but I didn't manage to use the autoupdate. I had no problem to manually download the firmware and upload it, so not really a problem. My device:
Type A10L Controller Version g1 Build Date 15th of July 2020 06:13 AM Platform Version a10l_20200715_061347
EDIT : I upgraded to the new firmware a10l_20200901_053652 but that didn't fixed the reboot issue.
Hey guys. Just coming finishing up my second year as a "Jack of all Trades" sysadmin/IT and after Passing my Sec+ my boss has approved my request to change my title to Sec Admin and work mostly full time on Securing our network as these past 2 years we've seen pretty large growth with at least 3 ransomware attacks and one employee installing bitcoin miners and getting away with it because literally nothing is logged. Our Company consists of our main office with 9 adminstrators and 3 IT guys. Me and another guy, and our manager. We have a 30 person call center in the building with a remote call center connected back here. We serve as a telecom with roughly 40,000 users. Since we have a bunch of phone equipment and such, We have 6 almost identical Colos that each have the work divided between them, but they do not act as failovers. If one Colo loses internet/power, those 10k or so customers are SOL Our security stance is this - and I quote "Don't get attacked". Hasn't worked so far. We do at the very least have a Fortigate Leads me to the CyberSec plan. My first project was adding and configuring a WSUS server so our servers that were last updated in 2018 can at least be a little more secure. I just now finished it and the documentation and now My director and CEO have thrown their full support behind whatever I suggest So i'm kinda insanely excited to just get to get after it with very little redtape. I've spent the last few weeks planning out what I think we need to at least get us up to "Mediocre" standing. Below is my list and my explanations. If all is good I will present this to our C-suite as our CyberSecuity Initiative. This list has gone through several changes and I know that some is way too much or I have the totally wrong idea on what this stuff is. As title says, feel free to tear it apart. I'm excited to learn all of this stuff. 9/15 Updated Cybersec Initiative Current List: -Full Risk/Impact analysis with a Disaster Recovery Plan // Was very surprised to hear we don't have any of this. We just got hit with a hurricane and we were down for almost a week because no disaster plans or fail overs -Entire Network Map with help of LibreNMS or other Net tools // We don't have any maps of our network. Most of what I know is because I have to ask where a server is and I keep a notebook of it around. -Audit security of our POS kiosk systems // We have a few kiosks out that process transactions and I know nothing of any security controls. Would it be a good idea to add these to our domain as well? -Contain the ridiculous VM sprawl // We have VMs that we have no idea what/if they do anything. Need to contain this -Combine our Call center and Main DC, Full permission Audit, add Group policy restrictions (Time of Day, Lockout), add all COLO servers to domain, add all technicians to domain // This is a big one. No point in my opinion of having 2 domains when one is literally one group called "Call center Agents". None of our field guys are added to our domain, and none of our COLO servers are on our domain. Group policy updates to limit time of day and password policies -Create a honeypot/net // This one is mostly for fun -Full rollout of Security Onion // One sensor at each COLO plus our main office network. Wazuh/Malwarebytes configured on every PC/Server we have. -Harden our outward facing Webservers // We don't do much as our websites are administered by another company, But i'd like to talk with them about it -Disable SNMPv2 or change community string // I know that our printers still have this -Create .iso of "stock OS" with malwarebytes/Wazuh already installed, system alreay hardened // More of a convenience -Configure Guest Wifi using best practices -Audit/Use Backups // I know we have backups of some things but not everything. Set this up with raid and/or offsite backup -Implement 2FA/SSO on user PCs // Outlook 2FA and SSO for some of our resources -Turn on firewall logging // Thats right. No logs on firewall at all. -Implement security policies on our Outlook stuff // Phishing detection, logging, etc -Train users on phishing campaigns and such // This wouldn't be until next year during annual company training TLDR: I'm now a sec admin and I'm looking for critique on if/why the above controls wouldn't work or are too much/overkill on our network that takes "Security through obscurity" to a new level. Feel free to fuck me up y'all. Edit: A lot more help than I thought I'd get. This has all been great. You guys are so much nicer than linux4noobs
This is a follow-up on https://old.reddit.com/Bitcoin/comments/hqzp14/technical_the_path_to_taproot_activation/ Taproot! Everybody wants it!! But... you might ask yourself: sure, everybody else wants it, but why would I, sovereign Bitcoin HODLer, want it? Surely I can be better than everybody else because I swapped XXX fiat for Bitcoin unlike all those nocoiners? And it is important for you to know the reasons why you, o sovereign Bitcoiner, would want Taproot activated. After all, your nodes (or the nodes your wallets use, which if you are SPV, you hopefully can pester to your wallet vendoimplementor about) need to be upgraded in order for Taproot activation to actually succeed instead of becoming a hot sticky mess. First, let's consider some principles of Bitcoin.
You the HODLer should be the one who controls where your money goes. Your keys, your coins.
You the HODLer should be able to coordinate and make contracts with other people regarding your funds.
You the HODLer should be able to do the above without anyone watching over your shoulder and judging you.
I'm sure most of us here would agree that the above are very important principles of Bitcoin and that these are principles we would not be willing to remove. If anything, we would want those principles strengthened (especially the last one, financial privacy, which current Bitcoin is only sporadically strong with: you can get privacy, it just requires effort to do so). So, how does Taproot affect those principles?
Taproot and Your /Coins
Most HODLers probably HODL their coins in singlesig addresses. Sadly, switching to Taproot would do very little for you (it gives a mild discount at spend time, at the cost of a mild increase in fee at receive time (paid by whoever sends to you, so if it's a self-send from a P2PKH or bech32 address, you pay for this); mostly a wash). (technical details: a Taproot output is 1 version byte + 32 byte public key, while a P2WPKH (bech32 singlesig) output is 1 version byte + 20 byte public key hash, so the Taproot output spends 12 bytes more; spending from a P2WPKH requires revealing a 32-byte public key later, which is not needed with Taproot, and Taproot signatures are about 9 bytes smaller than P2WPKH signatures, but the 32 bytes plus 9 bytes is divided by 4 because of the witness discount, so it saves about 11 bytes; mostly a wash, it increases blockweight by about 1 virtual byte, 4 weight for each Taproot-output-input, compared to P2WPKH-output-input). However, as your HODLings grow in value, you might start wondering if multisignature k-of-n setups might be better for the security of your savings. And it is in multisignature that Taproot starts to give benefits! Taproot switches to using Schnorr signing scheme. Schnorr makes key aggregation -- constructing a single public key from multiple public keys -- almost as trivial as adding numbers together. "Almost" because it involves some fairly advanced math instead of simple boring number adding, but hey when was the last time you added up your grocery list prices by hand huh? With current P2SH and P2WSH multisignature schemes, if you have a 2-of-3 setup, then to spend, you need to provide two different signatures from two different public keys. With Taproot, you can create, using special moon math, a single public key that represents your 2-of-3 setup. Then you just put two of your devices together, have them communicate to each other (this can be done airgapped, in theory, by sending QR codes: the software to do this is not even being built yet, but that's because Taproot hasn't activated yet!), and they will make a single signature to authorize any spend from your 2-of-3 address. That's 73 witness bytes -- 18.25 virtual bytes -- of signatures you save! And if you decide that your current setup with 1-of-1 P2PKH / P2WPKH addresses is just fine as-is: well, that's the whole point of a softfork: backwards-compatibility; you can receive from Taproot users just fine, and once your wallet is updated for Taproot-sending support, you can send to Taproot users just fine as well! (P2WPKH and P2WSH -- SegWit v0 -- addresses start with bc1q; Taproot -- SegWit v1 --- addresses start with bc1p, in case you wanted to know the difference; in bech32 q is 0, p is 1) Now how about HODLers who keep all, or some, of their coins on custodial services? Well, any custodial service worth its salt would be doing at least 2-of-3, or probably something even bigger, like 11-of-15. So your custodial service, if it switched to using Taproot internally, could save a lot more (imagine an 11-of-15 getting reduced from 11 signatures to just 1!), which --- we can only hope! --- should translate to lower fees and better customer service from your custodial service! So I think we can say, very accurately, that the Bitcoin principle --- that YOU are in control of your money --- can only be helped by Taproot (if you are doing multisignature), and, because P2PKH and P2WPKH remain validly-usable addresses in a Taproot future, will not be harmed by Taproot. Its benefit to this principle might be small (it mostly only benefits multisignature users) but since it has no drawbacks with this (i.e. singlesig users can continue to use P2WPKH and P2PKH still) this is still a nice, tidy win! (even singlesig users get a minor benefit, in that multisig users will now reduce their blockchain space footprint, so that fees can be kept low for everybody; so for example even if you have your single set of private keys engraved on titanium plates sealed in an airtight box stored in a safe buried in a desert protected by angry nomads riding giant sandworms because you're the frickin' Kwisatz Haderach, you still gain some benefit from Taproot) And here's the important part: if P2PKH/P2WPKH is working perfectly fine with you and you decide to never use Taproot yourself, Taproot will not affect you detrimentally. First do no harm!
Taproot and Your Contracts
No one is an island, no one lives alone. Give and you shall receive. You know: by trading with other people, you can gain expertise in some obscure little necessity of the world (and greatly increase your productivity in that little field), and then trade the products of your expertise for necessities other people have created, all of you thereby gaining gains from trade. So, contracts, which are basically enforceable agreements that facilitate trading with people who you do not personally know and therefore might not trust. Let's start with a simple example. You want to buy some gewgaws from somebody. But you don't know them personally. The seller wants the money, you want their gewgaws, but because of the lack of trust (you don't know them!! what if they're scammers??) neither of you can benefit from gains from trade. However, suppose both of you know of some entity that both of you trust. That entity can act as a trusted escrow. The entity provides you security: this enables the trade, allowing both of you to get gains from trade. In Bitcoin-land, this can be implemented as a 2-of-3 multisignature. The three signatories in the multisgnature would be you, the gewgaw seller, and the escrow. You put the payment for the gewgaws into this 2-of-3 multisignature address. Now, suppose it turns out neither of you are scammers (whaaaat!). You receive the gewgaws just fine and you're willing to pay up for them. Then you and the gewgaw seller just sign a transaction --- you and the gewgaw seller are 2, sufficient to trigger the 2-of-3 --- that spends from the 2-of-3 address to a singlesig the gewgaw seller wants (or whatever address the gewgaw seller wants). But suppose some problem arises. The seller gave you gawgews instead of gewgaws. Or you decided to keep the gewgaws but not sign the transaction to release the funds to the seller. In either case, the escrow is notified, and if it can sign with you to refund the funds back to you (if the seller was a scammer) or it can sign with the seller to forward the funds to the seller (if you were a scammer). Taproot helps with this: like mentioned above, it allows multisignature setups to produce only one signature, reducing blockchain space usage, and thus making contracts --- which require multiple people, by definition, you don't make contracts with yourself --- is made cheaper (which we hope enables more of these setups to happen for more gains from trade for everyone, also, moon and lambos). (technology-wise, it's easier to make an n-of-n than a k-of-n, making a k-of-n would require a complex setup involving a long ritual with many communication rounds between the n participants, but an n-of-n can be done trivially with some moon math. You can, however, make what is effectively a 2-of-3 by using a three-branch SCRIPT: either 2-of-2 of you and seller, OR 2-of-2 of you and escrow, OR 2-of-2 of escrow and seller. Fortunately, Taproot adds a facility to embed a SCRIPT inside a public key, so you can have a 2-of-2 Taprooted address (between you and seller) with a SCRIPT branch that can instead be spent with 2-of-2 (you + escrow) OR 2-of-2 (seller + escrow), which implements the three-branched SCRIPT above. If neither of you are scammers (hopefully the common case) then you both sign using your keys and never have to contact the escrow, since you are just using the escrow public key without coordinating with them (because n-of-n is trivial but k-of-n requires setup with communication rounds), so in the "best case" where both of you are honest traders, you also get a privacy boost, in that the escrow never learns you have been trading on gewgaws, I mean ewww, gawgews are much better than gewgaws and therefore I now judge you for being a gewgaw enthusiast, you filthy gewgawer).
Taproot and Your Contracts, Part 2: Cryptographic Boogaloo
Now suppose you want to buy some data instead of things. For example, maybe you have some closed-source software in trial mode installed, and want to pay the developer for the full version. You want to pay for an activation code. This can be done, today, by using an HTLC. The developer tells you the hash of the activation code. You pay to an HTLC, paying out to the developer if it reveals the preimage (the activation code), or refunding the money back to you after a pre-agreed timeout. If the developer claims the funds, it has to reveal the preimage, which is the activation code, and you can now activate your software. If the developer does not claim the funds by the timeout, you get refunded. And you can do that, with HTLCs, today. Of course, HTLCs do have problems:
Privacy. Everyone scraping the Bitcoin blockchain can see any HTLCs, and preimages used to claim them.
This can be mitigated by using offchain techniques so HTLCs are never published onchain in the happy case. Lightning would probably in practice be the easiest way to do this offchain. Of course, there are practical limits to what you can pay on Lightning. If you are buying something expensive, then Lightning might not be practical. For example, the "software" you are activating is really the firmware of a car, and what you are buying is not the software really but the car itself (with the activation of the car firmware being equivalent to getting the car keys).
Even offchain techniques need an onchain escape hatch in case of unresponsiveness! This means that, if something bad happens during payment, the HTLC might end up being published onchain anyway, revealing the fact that some special contract occurred.
And an HTLC that is claimed with a preimage onchain will also publicly reveal the preimage onchain. If that preimage is really the activation key of a software than it can now be pirated. If that preimage is really the activation key for your newly-bought cryptographic car --- well, not your keys, not your car!
Trust requirement. You are trusting the developer that it gives you the hash of an actual valid activation key, without any way to validate that the activation key hidden by the hash is actually valid.
Fortunately, with Schnorr (which is enabled by Taproot), we can now use the Scriptless Script constuction by Andrew Poelstra. This Scriptless Script allows a new construction, the PTLC or Pointlocked Timelocked Contract. Instead of hashes and preimages, just replace "hash" with "point" and "preimage" with "scalar". Or as you might know them: "point" is really "public key" and "scalar" is really a "private key". What a PTLC does is that, given a particular public key, the pointlocked branch can be spent only if the spender reveals the private key of the given public key to you. Another nice thing with PTLCs is that they are deniable. What appears onchain is just a single 2-of-2 signature between you and the developemanufacturer. It's like a magic trick. This signature has no special watermarks, it's a perfectly normal signature (the pledge). However, from this signature, plus some datta given to you by the developemanufacturer (known as the adaptor signature) you can derive the private key of a particular public key you both agree on (the turn). Anyone scraping the blockchain will just see signatures that look just like every other signature, and as long as nobody manages to hack you and get a copy of the adaptor signature or the private key, they cannot get the private key behind the public key (point) that the pointlocked branch needs (the prestige). (Just to be clear, the public key you are getting the private key from, is distinct from the public key that the developemanufacturer will use for its funds. The activation key is different from the developer's onchain Bitcoin key, and it is the activation key whose private key you will be learning, not the developer's/manufacturer's onchain Bitcoin key). So:
Privacy: PTLCs are private even if done onchain. Nobody else can learn what the private key behind the public key is, except you who knows the adaptor signature that when combined with the complete onchain signature lets you know what the private key of the activation key is. Somebody scraping the blockchain will not learn the same information even if all PTLCs are done onchain!
Lightning is still useful for reducing onchain use, and will also get PTLCs soon after Taproot is activated, but even if something bad happens and a PTLC has to go onchain, it doesn't reveal anything!
Trust issues can be proven more easily with a public-private keypair than with a hash-preimage pair.
For example, the developer of the software you are buying could provide a signature signing a message saying "unlock access to the full version for 1 day". You can check if feeding this message and signature to the program will indeed unlock full-version access for 1 day. Then you can check if the signature is valid for the purported pubkey whose private key you will pay for. If so, you can now believe that getting the private key (by paying for it in a PTLC) would let you generate any number of "unlock access to the full version for 1 day" message+signatures, which is equivalent to getting full access to the software indefinitely.
For the car, the manufacturer can show that signing a message "start the engine" and feeding the signature to the car's fimrware will indeed start the engine, and maybe even let you have a small test drive. You can then check if the signature is valid for the purported pubkey whose privkey you will pay for. If so, you can now believe that gaining knowledge of the privkey will let you start the car engine at any time you want.
(pedantry: the signatures need to be unique else they could be replayed, this can be done with a challenge-response sequence for the car, where the car gathers entropy somehow (it's a car, it probably has a bunch of sensors nowadays so it can get entropy for free) and uses the gathered entropy to challenge you to sign a random number and only start if you are able to sign the random number; for the software, it could record previous signatures somewhere in the developer's cloud server and refuse to run if you try to replay a previously-seen signature.)
Taproot lets PTLCs exist onchain because they enable Schnorr, which is a requirement of PTLCs / Scriptless Script. (technology-wise, take note that Scriptless Script works only for the "pointlocked" branch of the contract; you need normal Script, or a pre-signed nLockTimed transaction, for the "timelocked" branch. Since Taproot can embed a script, you can have the Taproot pubkey be a 2-of-2 to implement the Scriptless Script "pointlocked" branch, then have a hidden script that lets you recover the funds with an OP_CHECKLOCKTIMEVERIFY after the timeout if the seller does not claim the funds.)
Now if you were really paying attention, you might have noticed this parenthetical:
(technical details: a Taproot output is 1 version byte + 32 byte public key, while a P2WPKH (bech32 singlesig) output is 1 version byte + 20 byte public key hash...)
So wait, Taproot uses raw 32-byte public keys, and not public key hashes? Isn't that more quantum-vulnerable?? Well, in theory yes. In practice, they probably are not. It's not that hashes can be broken by quantum computes --- they're still not. Instead, you have to look at how you spend from a P2WPKH/P2PKH pay-to-public-key-hash. When you spend from a P2PKH / P2WPKH, you have to reveal the public key. Then Bitcoin hashes it and checks if this matches with the public-key-hash, and only then actually validates the signature for that public key. So an unconfirmed transaction, floating in the mempools of nodes globally, will show, in plain sight for everyone to see, your public key. (public keys should be public, that's why they're called public keys, LOL) And if quantum computers are fast enough to be of concern, then they are probably fast enough that, in the several minutes to several hours from broadcast to confirmation, they have already cracked the public key that is openly broadcast with your transaction. The owner of the quantum computer can now replace your unconfirmed transaction with one that pays the funds to itself. Even if you did not opt-in RBF, miners are still incentivized to support RBF on RBF-disabled transactions. So the extra hash is not as significant a protection against quantum computers as you might think. Instead, the extra hash-and-compare needed is just extra validation effort. Further, if you have ever, in the past, spent from the address, then there exists already a transaction indelibly stored on the blockchain, openly displaying the public key from which quantum computers can derive the private key. So those are still vulnerable to quantum computers. For the most part, the cryptographers behind Taproot (and Bitcoin Core) are of the opinion that quantum computers capable of cracking Bitcoin pubkeys are unlikely to appear within a decade or two.
Current quantum computers can barely crack prime factorization problem for primes of 5 bits.
The 256-bit elliptic curve use by Bitcoin is, by my (possibly wrong) understanding, equivalent to 4096-bit primes, so you can see a pretty big gap between now (5 bit primes) and what is needed (4096 bit primes).
A lot of financial non-Bitcoin systems use the equivalent of 3072-bit primes or less, and are probably easier targets to crack than the equivalent-to-4096-bit-primes Bitcoin.
Quantum computers capable of cracking Bitcoin are still far off.
Pay-to-public-key-hash is not as protective as you might think.
We will probably see banks get cracked before Bitcoin, so the banking system is a useful canary-in-a-coal-mine to see whether we should panic about being quantum vulnerable.
For now, the homomorphic and linear properties of elliptic curve cryptography provide a lot of benefits --- particularly the linearity property is what enables Scriptless Script and simple multisignature (i.e. multisignatures that are just 1 signature onchain). So it might be a good idea to take advantage of them now while we are still fairly safe against quantum computers. It seems likely that quantum-safe signature schemes are nonlinear (thus losing these advantages).
If you are a singlesig HODL-only Bitcoin user, Taproot will not affect you positively or negatively. Importantly: Taproot does no harm!
If you use or intend to use multisig, Taproot will be a positive for you.
If you transact onchain regularly using typical P2PKH/P2WPKH addresses, you get a minor reduction in feerates since multisig users will likely switch to Taproot to get smaller tx sizes, freeing up blockspace for yours.
If you are using multiparticipant setups for special systems of trade, Taproot will be a positive for you.
Remember: Lightning channels are multipartiicpiant setups for special systems of lightning-fast offchain trades!
I Wanna Be The Taprooter!
So, do you want to help activate Taproot? Here's what you, mister sovereign Bitcoin HODLer, can do!
If you have developer experience especially in C, C++, or related languages
Review the Taproot code! There is one pull request in Bitcoin Core, and one in libsecp256k1. I deliberately am not putting links here, to avoid brigades of nontechnical but enthusiastic people leaving pointless reviews, but if you are qualified you know how to find them!
But I am not a cryptographeBitcoin Core contributomathematician/someone as awesome as Pieter Wuille
That's perfectly fine! The cryptographers have been over the code already and agree the math is right and the implementation is right. What is wanted is the dreary dreary dreary software engineering: are the comments comprehensive and understandable? no misspellings in the comments? variable names understandable? reasonable function naming convention? misleading coding style? off-by-one errors in loops? conditions not covered by tests? accidental mixups of variables with the same types? missing frees? read-before-init? better test coverage of suspicious-looking code? missing or mismatching header guards? portability issues? consistent coding style? you know, stuff any coder with a few years of experience in coding anything might be able to catch. With enough eyes all bugs are shallow!
If you are running a mining pool/mining operation/exchange/custodial service/SPV server
Be prepared to upgrade!
One of the typical issues with upgrading software is that subtle incompatibilities with your current custom programs tend to arise, disrupting operations and potentially losing income due to downtime. If so, consider moving to the two-node setup suggested by gmax, which is in the last section of my previous post. With this, you have an up-to-date "public" node and a fixed-version "private" node, with the public node protecting the private node from any invalid chainsplits or invalid transactions. Moving to this setup from a typical one-node setup should be smooth and should not disrupt operations (too much).
If you are running your own fullnode for fun or for your own wallet
Be prepared to upgrade! The more nodes validating the new rules (even if you are a non-mining node!), the safer every softfork will be!
If you are using an SPV wallet or custodial wallet/service (including hardware wallets using the software of the wallet provider)
Contact your wallet provider / SPV server and ask for a statement on whether they support Taproot, and whether they are prepared to upgrade for Taproot! Make it known to them that Taproot is something you want!
But I Hate Taproot!!
Raise your objections to Taproot now, or forever hold your peace! Maybe you can raise them here and some of the devs (probably nullc, he goes everywhere, even in rbtc!) might be able to see your objections! Or if your objections are very technical, head over to the appropriate pull request and object away!
Maybe you simply misunderstand something, and we can clarify it here!
Or maybe you do have a good objection, and we can make Taproot better by finding a solution for it!
The previous 7-month low was measured on March 8, 2020 at $ 54,806.16. However, it’s not always all about numbers, the Basic Attention Token devotes almost all its efforts to its Brave browser, which builds a strategy on rewarding users for browsing and, according to the latest statistics, Brave recently reached 18.3 million monthly active users. ... It says that, now, some Bitcoin miners may start switching off their rigs due to the recent Bitcoin price crash. ‘Bitcoin miners now unprofitable’ On his Twitter page, digital asset manager Charles Edwards has shared a chart, saying that the current Bitcoin price level is becoming unprofitable for miners. Currently, he explains, the cost of ... BitCoin miner virus or BitCoin mining virus is a dangerous malware that may use your CPU and/or GPU to obtain BitCoin cryptocurrency by mining illegally. Cryptocurrency miners keep hitting computers and trying to use their resources to generate revenue for their developers. Bitcoin Miner Pro virus removal guide What is Bitcoin Miner Pro? There are various cryptocurrency miners available for download on the Internet, although, not all of them are legitimate. One of those fake cryptocurrency miners is called Bitcoin Miner Pro. Scammers behind such miners generate profit by tricking users into paying them a ... How to start Bitcoin Mining Using USB ASIC. There are many USB ASIC miners out there, one of the more popular one is the GekkoScience Newpac which is an upgraded version of the older 2PAC version. This USB ASIC miner cost a fraction of a full fledged ASIC machine and retails at around 60 USD.
Follow mOE at: ☻http://www.twitch.tv/m0e_tv ☻https://www.facebook.com/m0etv ☻https://twitter.com/m0E_tv ☻https://instagram.com/m0e_tv Intro By PubFX http... How to manually remove these little performance ruining bastards. These things are becoming the new epidemic. Most anti viruses don't detect them because the... Instruction book: https://images-na.ssl-images-amazon.com/images/I/81lOfu4a6VL.pdf Driver usb: https://zadig.akeo.ie/ Forum Gekko Newpac: https://bitcointalk... Remote Desktop Manager link - https:... Skip navigation Sign in. ... Data Networking for Medium Size Bitcoin Mining Operations ... 5 Settings For Mining Cryptocurrency On Windows 10 ... How to Mine Bitcoin with Nicehash 2019 www.nicehash.com Support with crypto: https://streamlabs.com/brandoncoin1#/crypto Easy way to get started mining crypt...