5 Steps to Install Bitcoin-Qt Faster - Bitcoin-en.com
Bitcoin-QT taking too long to sync! : Bitcoin
Wallet won't sync - Why your wallet is not syncing and how ...
Bitcoin Qt Not Updating - Hotel Breidafjordur
Bitcoin-qt not syncing at all?
I recently downloaded bit coin-qt to use on mavericks. I just wanted to have some bit coins stores locally for fun. It doesn't seem to synchronize at ALL I've left it for a couple hours and it's still 0 out of 28,000 or something like that. I downloaded the bootstrap.dat and put it in the correct folder but it doesn't import them, it says importing block chain from disk but it doesn't show any progress, whats the problem?
(windows 7) I installed Armory for the first time and it was building the database so I left it on overnight to finish. In the morning, It said "bitcoind.exe has stopped working error" then it tell ms "Armory is offline" I relaunch the bitcoinQT app and eventually armory will continue to build the database (but with no % progress shown) and then soon after I get "bitcoind has stopped due to an error" and this process repeats. Looking at bitcoinQT - I notice that it has been stuck at 28 weeks syncornizing for a long time. This was happenineg to me before I even installed armory. This was a main reason I installed armory because I was sick of bitcoinQT not syncing. Is this related? How do I fix this? Thank you
So I started downloading the Bitcoin-QT client to run my own node. At first there blockchain download was fast but now it's grinded to a halt, staying between 0.00%-0.09% increase per hour. I've tried reinstalling on macOS but still nada. Any one got any advice?
I am having a weird issue with my Bitcoin.qt program. is not syncing past the last 7 days of transactions.
I am having a weird issue with Bitcoin.qt. It's not syncing past the last 7 days of transactions. I have deleted and reinstalled the program, plus deleting the blockchain and user data. Its been stuck on the same block for over 6 hours. Before I deleted is was stuck at 7 days also. My armory is not able to get online even with its own version of qt. The only thing I haven't done is delete armory but my thinking is the qt problem has to be fixed first.
This is frustrating. This might be the 10th time I've had to try to explain this in this subreddit: Bitcoin-qt blockchain downloading is NOT network bound. It is HDD bound. Bitcoind/qt 0.8 greatly increases initial chain sync speed because it reduces the HDD bottleneck.
https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/220.127.116.11 Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that. Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap. We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout. Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.
Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now. Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date. The transition height is also when the team requirement will be relaxed for the network.
Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.
The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use. There are so many goodies here it is hard to summarize them all. I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures. The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!
Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.
Network magnitude unit pinned to a static value of 0.25
Max research reward allowed per block raised to 16384 GRC (from 12750 GRC)
New CPIDs begin accruing research rewards from the first superblock that contains the CPID instead of from the time of the beacon advertisement
500 GRC research reward limit for a CPID's first stake
6-month expiration for unclaimed rewards
10-block spacing requirement between research reward claims
Rolling 5-day payment-per-day limit
Legacy tolerances for floating-point error and time drift
The need to include a valid copy of a CPID's magnitude in a claim
10-block emission adjustment interval for the magnitude unit
One-time beacon activation requires that participants temporarily change their usernames to a verification code at one whitelisted BOINC project
Verification codes of pending beacons expire after 3 days
Self-service beacon removal
Burn fee for beacon advertisement increased from 0.00001 GRC to 0.5 GRC
Rain addresses derived from beacon keys instead of a default wallet address
Beacon expiration determined as of the current block instead of the previous block
The ability for developers to remove beacons
The ability to sign research reward claims with non-current but unexpired beacons
As a reminder:
Beacons expire after 6 months pass (180 days)
Beacons can be renewed after 5 months pass (150 days)
Renewed beacons must be signed with the same key as the original beacon
Magnitudes less than 1 include two fractional places
Magnitudes greater than or equal to 1 but less than 10 include one fractional place
A valid superblock must match a scraper convergence
Superblock popularity election mechanics
Yes/no/abstain and single-choice response types (no user-facing support yet)
To create a poll, a maximum of 250 UTXOs for a single address must add up to 100000 GRC. These are selected from the largest downwards.
Burn fee for creating polls scaled by the number of UTXOs claimed
50 GRC for a poll contract
0.001 GRC per claimed UTXO
Burn fee for casting votes scaled by the number of UTXOs claimed
0.01 GRC for a vote contract
0.01 GRC to claim magnitude
0.01 GRC per claimed address
0.001 GRC per claimed UTXO
Maximum length of a poll title: 80 characters
Maximum length of a poll question: 100 characters
Maximum length of a poll discussion website URL: 100 characters
Maximum number of poll choices: 20
Maximum length of a poll choice label: 100 characters
Magnitude, CPID count, and participant count poll weight types
The ability for developers to remove polls and votes
[18.104.22.168] 2020-09-03, mandatory, "Fern"
Backport newer uint256 types from Bitcoin #1570 (@cyrossignol)
Implement project level rain for rainbymagnitude #1580 (@jamescowens)
Upgrade utilities (Update checker and snapshot downloadeapplication) #1576 (@iFoggz)
Provide fees collected in the block by the miner #1601 (@iFoggz)
Add support for generating legacy superblocks from scraper stats #1603 (@cyrossignol)
Port of the Bitcoin Logger to Gridcoin #1600 (@jamescowens)
Implement zapwallettxes #1605 (@jamescowens)
Implements a global event filter to suppress help question mark #1609 (@jamescowens)
Add next target difficulty to RPC output #1615 (@cyrossignol)
Add caching for block hashes to CBlock #1624 (@cyrossignol)
Make toolbars and tray icon red for testnet #1637 (@jamescowens)
Add an rpc call convergencereport #1643 (@jamescowens)
Implement newline filter on config file read in #1645 (@jamescowens)
Implement beacon status icon/button #1646 (@jamescowens)
Add gridcointestnet.png #1649 (@caraka)
Add precision to support magnitudes less than 1 #1651 (@cyrossignol)
Replace research accrual calculations with superblock snapshots #1657 (@cyrossignol)
Publish example gridcoinresearch.conf as a md document to the doc directory #1662 (@jamescowens)
Add options checkbox to disable transaction notifications #1666 (@jamescowens)
Add support for self-service beacon deletion #1695 (@cyrossignol)
Add support for type-specific contract fee amounts #1698 (@cyrossignol)
Add verifiedbeaconreport and pendingbeaconreport #1696 (@jamescowens)
Add preliminary testing option for block v11 height on testnet #1706 (@cyrossignol)
Add verified beacons manifest part to superblock validator #1711 (@cyrossignol)
Implement beacon, vote, and superblock display categories/icons in UI transaction model #1717 (@jamescowens)
New England New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/ NewEnglandcoin Symbol: NENG NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones. Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt. 1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377 NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number Bitcoin Fork - Suitable for Home Hobbyists NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs. The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity. MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018) https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software. Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%. NENG v1.4.0 release enabled CPU mining inside android phones. Youtube Video Tutorial How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG. We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange. Twitter Airdrop Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners Graphic Redesign Bounty Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form. Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues. Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1 Milestones
Sep 3, 2018 - Genesis block was mined, NewEnglandcoin created
Sep 8, 2018 - github source uploaded, Window wallet development work started
Sep 11,2018 - Window Qt Graphic wallet completed
Sep 12,2018 - NewEnglandcoin Launched in both Bitcointalk forum and Marinecoin forum
Sep 14,2018 - NewEnglandcoin is listed at ShorelineCrypto Exchange
Sep 17,2018 - Block Explorer is up
Nov 23,2018 - New Source/Wallet Release v1.1.1 - Enabled Dynamic Addjustment on Mining Hashing Difficulty
Nov 28,2018 - NewEnglandcoin became CPU minable coin
Nov 30,2018 - First Retail Real Life usage for NewEnglandcoin Announced
Dec 28,2018 - Cheetah_Cpuminer under Linux is released
Dec 31,2018 - NENG Technical Whitepaper is released
Jan 2,2019 - Cheetah_Cpuminer under Windows is released
Jan 12,2019 - NENG v1.1.2 is released to support MacOS GUI CLI Wallet
Jan 13,2019 - Cheetah_CpuMiner under Mac is released
Feb 11,2019 - NewEnglandcoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork
Mar 16,2019 - NewEnglandcoin v22.214.171.124 Released - Ubuntu 18.04 Wallet Binary Files
Apr 7, 2019 - NENG Report on Security, Decentralization, Valuation
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto
Sep 1, 2019 - Shoreline Tradingbot project is Launched by ShorelineCrypto
Dec 19, 2019 - Shoreline Tradingbot v1.0 is Released by ShorelineCrypto
Jan 30, 2020 - Scrypt RandomSpike - NENG v1.3.0 Hardfork Proposed
Feb 24, 2020 - Scrypt RandomSpike - NENG core v1.3.0 Released
Jun 19, 2020 - Linux scripts for Futurebit Moonlander2 USB ASIC on solo mining Released
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining and Ubuntu 20.04 support
Jul 21, 2020 - NENG v126.96.36.199 Released for MacOS Wallet Upgrade with Catalina
Jul 30, 2020 - NENG v188.8.131.52 Released for Linux Wallet Upgrade with 8 Distros
Aug 11, 2020 - NENG v184.108.40.206 Released for Android arm64 Upgrade, Chromebook Support
Aug 30, 2020 - NENG v220.127.116.11 Released for Android/Chromebook with armhf, better hardware support
2018 Q3 - Birth of NewEnglandcoin, window/linux wallet - Done
2018 Q4 - Decentralization Phase I
Blockchain Upgrade - Dynamic hashing algorithm I - Done
Cheetah Version I- CPU Mining Automation Tool on Linux - Done
2019 Q1 - Decentralization Phase II
Cheetah Version II- CPU Mining Automation Tool on Window/Linux - Done
Blockchain Upgrade Dynamic hashing algorithm II - Done
2019 Q2 - Fiat Phase I
Assessment of Risk of 51% Attack on NENG - done
Launch of Fiat USD/NENG offering for U.S. residents - done
Initiation of Mobile Miner Project - Done
2019 Q3 - Shoreline Tradingbot, Mobile Project
Evaluation and planning of Mobile Miner Project - on Hold
Initiation of Trading Bot Project - Done
2019 Q4 - Shoreline Tradingbot
Shoreline tradingbot Release v1.0 - Done
2020 Q1 - Evaluate NENG core, Mobile Wallet Phase I
NENG core Decentralization Security Evaluation for v1.3.x - Done
Light Mobile Wallet Project Initiation, Evaluation
2020 Q2 - NENG Core, Mobile Wallet Phase II
NENG core Decentralization Security Hardfork on v1.3.x - Scrypt RandomSpike
Light Mobile Wallet Project Design, Coding
2020 Q3 - NENG core, NENG Mobile Wallet Phase II
Review on results of v1.3.x, NENG core Dev Decision on v1.4.x, Hardfork If needed
Light Mobile Wallet Project testing, alpha Release
2020 Q4 - Mobile Wallet Phase III
Light Mobile Wallet Project Beta Release
Light Mobile Wallet Server Deployment Evaluation and Decision
I'm syncing a full node on a Raspberry pi 4 with 8GB memory, external disk drive (not ssd), broadband internet. It's going extremely slow--estimated time about 4 years. Google has turned up all kinds of advice like setting: dbcache=4096 (setting aside half my ram) blocksonly=1 banscore=10 listen=0 par=-1 When I run top, I see bitcoin-qt is only using about 12% of the CPU. When it boots and is loading the block index, I see that go up to 100+%. So for whatever reason, it's not fully utilizing the CPU on the machine while processing blocks. I tested my internet connection and have 56Mbps down, 6Mbps up. My only theory is that the external hard drive is being the bottleneck. Is there anything else to do, or should I order a SSD?
Hello! I’m seeking help from the /bitcoin community to recover lost funds from a wallet.dat file. Someone I know asked me to help recover their lost funds - but I’m stumped and now seeking help from the experts. Facts
A wallet.dat file was created in approximately July 2017
Ubuntu Linux (v17.10?)
Bitcoin Core QT (v0.16.2?)
The original wallet.dat file is backed up and remains accessible
Purchases were made on Coinbase and sent to an initial receiving address within this wallet
A few months pass…
Additional purchases are sent from Coinbase to NEWLY GENERATED receiving addresses (presumably same wallet)
A few years pass…
The person now wants to send their funds back to Coinbase for sale
They have the original wallet.dat file, but only one receiving address is visible (presumably the initial one)
The wallet.dat file was backed up ONLY ONCE, and PRIOR to the generation of those new receiving addresses
The device used to create the new receiving addresses cannot be found!
Loading the wallet.dat file into current Bitcoin core software does not display the subsequent transactions or receiving addresses!
Can the funds for all transactions be recovered?
What about the funds which were sent to the new receiving addresses, which were created POST BACKUP of the wallet.dat file?
BONUS: If they can be recovered, what’s the best software to accomplish this, and can it also be done for the Bitcoin Cash which presumably remain associated to this wallet.dat file? Ideally without re-syncing the whole blockchain.
I was under the impression that the wallet.dat file contained a private key which corresponds to any / all newly created receiving addresses, but I must be mistaken. Any advice would be greatly appreciated. The person is at a dead end and I'm fresh out of ideas. Thank you
Evo uses Proof of Stake consensus mechanism, which is different from Bitcoin's PoW (Proof of Work). Evo mining process in PoS system is called staking. The block producer will get 6.5EVO, as well as the transaction fees and gases as block reward. So the real reward is usually more than 6.5 evo in total. Basic requirements for staking：
Run a Coinevo fullnode, and keep online (Since Coinevo is using PoS, we don't need any mining machine, just PC or even Raspberry Pi can run a fullnode);
Have some EVO in the wallet (fullnode)（Any amount of EVO can be used for staking, more EVO means higher possibility to stake).
If you have no EVO yet, please get some from market before you doing following staking settings. Currently, Coinevo Core wallet is the only wallet that support Coinevo PoS staking. Note that other wallets like mobile wallet and Evo Electrum are not able to stake for the time being. Two ways to stake:
Method 1：Staking with evod, using command line, suitable for Linux/OSX/Windows/Raspberry Pi users who are familiar with command line tools.
Method 2：Staking with evo-qt wallet, with GUI, suitable for common users.
Either way works in the same way for staking, so you can choose either method you like.
Method 1：Staking with evod (command line)
1. Run evod
Follow the guidance to run evod :
Staking is default on for evod, so no need for other options if you only want to stake.
2. Send some EVO to your wallet
First you can generate a new address with：
This will generate a new address with Prefix '1'. You can send some EVO to this new generated address for staking. You can generate as many addresses as you like, and send arbitrary EVO as you like for staking. Note：The coin should wait for 500 blocks before being able to stake, i.e. about 17 to 24 hours to MATURE.. After the EVO node syncing to the latest block, you can check current balance with ./evo-cli getbalance or get utxo list with./evo-cli listunspent Please do following steps after your coin is mature.
enabled means if your wallet have enabled staking, it should be true by default. staking means if your wallet is currently staking (mining). weight stands for the amount of EVO that is staking right now, with unit 10^-8EVO, here in the example, we have 0.532EVO staking. expectedtime stands for the expected time that you will get a reward, the unit is second.
4. How to stake if the wallet is encrypted？
If your wallet is not encrypted, you can skip this section. However, for security, we recommand you encrypt your wallet. Coinevo wallet can be encrypted with encryptwallet . However, staking will be stopped when it is encrypted. For example, ./evo-cli getstakinginfo for a encrypted wallet：
See staking turns to false , which means wallet is not staking. You can use walletpassphrase to unlock wallet for staking：
./evo-cli walletpassphrase "" 99999999 true
After unlocking, you can double check getstakinginfo , it should look the same with previous unlocked result, staking become true.
Method 2: Staking with evo-qt wallet (official PC wallet)
Current supported platform: Mac/Linux/Windows.
1. Open Evo qt wallet
Launch the wallet.
2. Send some EVO to your wallet
If you already have some EVO in your wallet, you might skip this step. Note：The coin should wait for 500 blocks before being able to stake, i.e. about 17 to 24 hours to MATURE..
3. Check staking status
The flash sign at the bottom of wallet shows staking info : Solid black flash means it is staking now. For more information, you can put your mouse on the flash, e.g.:
Staking : if it is staking；
Your weight is : How many EVO are able to used for staking, unit is EVO;
Network weight is : How many EVO are staking in the network, unit is EVO；
Expected time : expected time to get reward, unit is Day.
Hollow flash measn it is not staking Possible reasons for not staking：
1.There is no coins of no mature coins (more than 500 confirmations(blocks)) -- Solution: send some EVO to the wallet and wait for 500 blocks (about 17 hours);
2.Wallet is locked/encrypted -- Solution: unlock the wallet for staking.
No flash sign means staking is disabled
3.Staking is disabled -- Solution: enable staking in the evo.conf (-staking=true)
About block reward
The block producer will get more than 6.5 EVO rewards, something to keep in mind:
The reward come from a new transaction, you can check balance to see if you get the reward.
Once succesfully stake, you will get 0.65EVO reward immediately.
Other 5.85EVO will be sent to you after 500 blocks (about 17 or 24 hours), in continuous 9 blocks, within each block you will get 0.65EVO,, so in total it will be 5.85EVO.
The staked coins (UTXO) will be locked for 500 blocks, during this period, it cannot be spent nor be used to stake.
How to disable staking?
Staking is by default enabled for Coinevo wallet. If you need to disable staking for some reason (for example exchanges are always recommanded to disable staking), you might following anyone of the 3 ways below: 1 Add -staking=false when running Coinevo node：
./evod -staking=false -daemon
For qt wallet, it is like：
2 Add config staking=false in evo.conf; 3 Encrypt wallet, since encrypted wallet will automatically stop staking.
The last month in the world of Mousecoin has been HUGE! There have been many changes, the addition of new awesome ways to earn MIC3 including ourFaucetspage and thePhoneumGames. We have also seen the launch of ourCommunity Membership, which entitles each registered user to receive up to 200,000 MIC3 per month. We hope you are all keeping safe and are happy to provide you with our Mousecoin Network May 2020 Report.
MOUSECOIN IN GAMES!!
FINALLY, after months of negotiation and with the help ofPhoneum, Mousecoin has partnered withPhoneumto be included in two of the most popularPhoneumcrypto games currently available.We have added a newGamespage, whiche features all the information and link for the games, with more to come.Here is the run down:
📷 Crypto Treasures is a game, where players complete various quests, trivia and mini games to unlock Gold (in-game currency), Treasure Chests, Items, Collectibles, and various Crypto currencies, including the featured Mousecoin (MIC3).
📷 Visit a new type of planet, one that allows you to earn real cryptocurrencies while playing a beautiful and futuristic game. The main objective is to extract the valuable resources of the planet: Crystals. There is a special machine designed specifically to dig up the Crystals automatically and deliver them to you. All you have to do is activate the Digger and after 4 hours, it will have the resources ready to be claimed.
Earn up to 200,000 MIC3 Per Month!
At the beginning of last month we began establishing ourCommunity Membershipwhich offers all registered Mousecoin Members a share of the rewards earned from theCommunity Fundjust for being a member and following Mousecoin on all of oursocial media.As we come to the end of the first month we are currently in the process of checking all registrations and working out payments. We have also updated the profile page to include a Member News tab, Verified Notifications for each Social Media and a Monthly Payment History section. We are currently working on verifying all accounts registered before 1/6/2020, and should have all of these processed in the next few days, with all payment going out before the end of the week.
Become a part of the Mousecoin (MIC3) Community.Membership is FREE and it comes with HUGE bonuses!!
Just a reminder for the community and also for any new members, we have added aWallet Setup Guidespage, which takes any first time user of Mousecoin step-by-step through the process of installing their Mousecoin wallet and getting it online. The guide uses the latestblockchain snapshotfound on theWallet DownloadsPage in the example explanation meaning that all new members of the Mousecoin community will be able to get their wallets online faster as the sync time should be minimal. We will be updating theblockchain snapshotat least once every month to ensure that people have access to the most up to date blockchain info. The latestblockchain snapshotwas performed on the 1st June 2020. The wallet version is currenty V18.104.22.168, with future releases of the Mousecoin wallet coming soon If you are new to crypto currency or just after a bit of guidance setting up the Mousecoin wallet, check out ourWallet Setup Guides 📷Windows 📷Raspberry Pi 📷Wallet & Blockchain Snapshot Download (UPDATED 01-06-2020)
POS & STAKING
In the last month we asked the community if they would be interested in being a part of a Community Staking Pool. After investigations into this finding security flaws in most platforms, as well as the lack of interest from members of the community we have decided to not go ahead with the Community Staking Pool. While we understand that there are members of the Mousecoin Community that are unable to stake themselves for whatever reason, and that there are a number of staking platforms that offer pool staking for MIC3 to help these people stake, we will not officially be supporting any staking platforms.We ask all Community members using these or thinking about using these to keep in mind that any MIC3 hosted on these platforms is not in their wallets, and therefore not controlled by them. Do proper investigations into any platform that you use for this as there is always the possibility of loss. We encourage all members of the Mousecoin Community to stake from their own wallet (where possible) as this helps us to secure the network. If you need help setting up your wallet, go to ourWallet Setup Guidespage for step-by-step guides on setting up your Mousecoin wallet.
We have updated the Mousecoin (MIC3)FaucetsPage: To make things clearer and we will be adding more faucets soon!
Last month we saw the edition of theUSDT/MIC3pair tonanu exchange. In our efforts to increase exposure of Mousecoin, we are still attempting to list on bothATAIXandUnnamed.Exhchange. ATAIXWe have risen to 18th position in the voting list onATAIX, but we still need your votes. Remember you can vote every 24 hours for this listing, and you can share in 125,000,000 MIC3 📷 Unnamed.ExhchangeThe exchange listing forUnnamed.Exhchangeis 0.05 BTC.For anyone unfamiliar with the exchange there are two ways that you can donate to the listing: 1. If you are already a member of, or wish to be a member ofUnnamed.Exhchange(and why wouldn’t you), you can put funds towards our listing by tipping us through the trollbox (Mousecoins). If you wish to be a member ofUnnamed.Exhchange, you can register here:https://www.unnamed.exchange/Login/Register 2. You can also donate to the listing fee through the following addresses:BTC – bc1qmaqzhfqcw0urva0rtgfz5qvq4rw7kdnp6j7754LTC – ltc1qc775eeftdde2jrevnyukrd2w9853jy5gmtv6rnDOGE – DEnBpriaFnKiNeBv6Q7MVxMg5hLv5urQFgUTIP – AUTyu2JhGAaCkM3KAmeBopto2bNBchNJfE If you would like to donate in another crypto available onUnnamed.Exhchange, we have opened up the chat on the Discord channelHEREto assist with this. Please request the address and we will provide it for you.ANY AND ALL DONATIONS ARE WELCOME!!This is a good exchange and getting a listing her should help lift the profile of MIC3. We will be reporting balances to the discord channelhttps://discord.gg/cYuA8FA
📷 In the last month theCommunity Fundhas undergone a huge amount of change. We have completely moved all of our remaining balances away from 4Stake, with the MIC3 going to theCommunity FundMIC3 account and the remaining crypto’s towards out listing onUnnamed.Exhchange. TheCommunity Fundpage on the website has also been updated to reflect all of the changes.It is an exciting time for theCommunity Fundas we have now reached a balance that will sustain itself. This is why we have introduced the Community Member payment, and are able to sustain the faucets we have onhttps://erex.io/freecoin/and in thePhoneumGames. There is still more to come! 📷
HELP! OverflowError: timestamp out of range for platform time_t
Hi, I am guessing this means Electrum Wallet is set to a particular time zone, which is not allowing me to send bitcoin. As I tried to send to the exchange and found this error popped up. This is my first time using the wallet and I have no idea how to change the time to sync. Anyone have an idea what I can do to change it(thats is it is the time issue) so I can send to exchange. Thanks Traceback Traceback (most recent call last): File "/home/dotbin/electrum/electrum/gui/qt/main_window.py", line 1542, in do_pay self.do_pay_invoice(invoice) File "/home/dotbin/electrum/electrum/gui/qt/main_window.py", line 1555, in do_pay_invoice self.pay_onchain_dialog(self.get_coins(), outputs) File "/home/dotbin/electrum/electrum/gui/qt/main_window.py", line 1591, in pay_onchain_dialog external_keypairs=external_keypairs) File "/home/dotbin/electrum/electrum/gui/qt/main_window.py", line 1617, in preview_tx_dialog window=self) File "/home/dotbin/electrum/electrum/gui/qt/transaction_dialog.py", line 690, in __init__ finalized=False, external_keypairs=external_keypairs) File "/home/dotbin/electrum/electrum/gui/qt/transaction_dialog.py", line 126, in __init__ self.add_tx_stats(vbox) File "/home/dotbin/electrum/electrum/gui/qt/transaction_dialog.py", line 634, in add_tx_stats self.locktime_e = LockTimeEdit() File "/home/dotbin/electrum/electrum/gui/qt/locktimeedit.py", line 32, in __init__ self.locktime_date_e = LockTimeDateEdit() File "/home/dotbin/electrum/electrum/gui/qt/locktimeedit.py", line 155, in __init__ self.setMaximumDateTime(datetime.fromtimestamp(self.max_allowed_value)) OverflowError: timestamp out of range for platform time_t Additional information
Note: I don't know exactly how long it took because I didn't do it in one go. I guess it was like 4,5 days doing it only at night. At some points(2015Q3, 2018Q2) it slows down and ETA goes up to 16 weeks or something. The main bottleneck is IO. My 2013 mobile i3 has enough processing power to sync, I only used 3 threads and most of the time only one was close to 100%. The two directories that need to be written and read from intensively are chainstate and blocks/index. I pruned to 2GB and chainstate didn't go much over 3GB during the entire process. blocks/index is like 100MB. The best solution is to move chainstate and blocks/index to a ramdisk. If you don't have enough ram the linux kernel has a thing called zram. Zram creates a compressed swap(cache) file in ram, this effectively increases your ram size at the cost of a bit of processing power and access speed(of the compressed part). On my machine I can net a bit more than 1GB of extra ram. That's right, with linux you can download more ram! The second best solution is to leave chainstate and block/index on a sdd. From what I've tested it should take up between 5 whole days and 2 weeks. With regards to config, I didn't see much benefit in increasing the db cache over the default 450MB in bitcoin-qt. If I recall correctly, smaller prune sizes make chainstate larger. After the initial sync keeping up to date is very easy on resources. You can catch up a week in a few minutes. At the moment bitcoind is using 400MB but I'm still working on bringing that number down. Remember: If you want safety or if you want to help the network you need o run a full node. A full node is a node that verifies all transactions. A pruned node is a full node. Edit: bitocoind really likes to hover around 400MB, sometimes it gets higher than that, some times it get's lower. A lot of that is data, not code, so if you start running out of ram your OS should drop those pages and get down to 250~300MiB. If you really want the memory to be this low all the time, on linux, you can either: Use cgroups to set the swappiness of the process to 99 so all data gets swapped but not code does; Use systemd and set MemoryLimit=300MiB(for example) so almost all data gets swapped but no code. I don't think any of those options are worth the small setup hassle.
Storage space: I am using an 8 GB microSD card for the OS, and a 128 GB USB drive for data. Minimums I would recommend: 8GB SD card and 32 GB USB drive.
Reddcoin Core client version: v22.214.171.124-a8767ba-beta (most recent version at this moment). ↳ Screenshot
You need the OS; Lubuntu. Download Lubuntu (707 MB) for the Raspberry Pi: https://ubuntu-pi-flavour-maker.org/download/. It's a .torrent download, so you will need a BitTorrent client. Message me or post in this thread if you need help with this.
You need software to write the OS to the SD card. I use Etcher. Download Etcher: https://etcher.io/.
Select image: select the lubuntu-16.04.2-desktop-armhf-raspberry-pi.img.xz file.
Select drive: select your microSD card.
Plug the SD card into your Raspberry Pi and power it up.
Lubuntu should boot up.
Set up Lubuntu, connect to the internet (wired or wireless). ↳ As username, I chose "rpi3b". You will see this username throughout this whole tutorial.
Make sure date and time are correct ([Menu] > System Tools > Time and Date). ↳ Click on Unlock to make changes. I personally change Configuration to "Keep synchronized with Internet servers". ↳ Screenshot
Reboot ([Menu] > Logout > Reboot). I am connected to wifi, but have issues getting wifi to work on initial boot. A reboot solves this issue.
Make sure system is up-to-date, install never versions.
Open LXTerminal ([Menu] > System Tools > LXTerminal). ↳ Screenshot
Enter the following in LXTerminal: sudo apt update && sudo apt upgrade ↳ Screenshot
You will be asked if you really want to continue. Enter Y (yes).
Updates are being installed! Wait until it's finished.
Install programs that will be used in this tutorial.
GParted: to partition the USB drive.
Htop: to see the amount of memory (RAM) and swap that is in use.
Enter the following in LXTerminal to install these 2 programs. sudo apt install gparted && sudo apt install htop ↳ Screenshot
Create 2 partitions on the USB drive: 1) Swap partition 2) data partition (for the Reddcoin blockchain) The swap partition is necessary: The Reddcoin wallet can be memory intensive. To prevent any crashes or freezes, add 2 GB of 'virtual' memory by creating a swap partition.
Important: Backup your USB drive if needed. The USB drive will be formatted, so the data on the USB drive will be wiped.
Please use the USB drive solely for this purpose, do not combine it with other stuff.
Keep your USB drive plugged in, do not (randomly) plug it out.
Plug your USB drive in.
GParted will be used to create the partititons. Start GParted via LXTerminal: sudo gparted ↳ Screenshot
Apply the changes. Click on the check mark or select Edit > Apply All Operations. ↳ Screenshot ↳ Screenshot
Important: The name of the swap partition is needed later, so please write it down. Mine is /dev/sda1 (first partition on first drive (drive 'a')). ↳ Screenshot
Reboot. After the reboot, the data partition you just created should be visible on your desktop. ↳ Screenshot
The swap partition is created, so now we can enable and use it.
The swap in use can be monitored with the program Htop. Open Htop ([Menu] > System Tools > Htop) to see the 'Swp' (swap) in use. ↳ Screenshot By default, swap is not used, so 0K. ↳ Screenshot You can leave Htop open.
To enable the swap partition, open LXTerminal and enter the following commands: (Assuming /dev/sda1 is your swap partition.)
Unpack the file (large file, takes around 15 minutes to unpack): sudo xz -d bootstrap.dat.xz ↳ Screenshot
After a successful unpack, your will find the file bootstrap.dat in your USB root folder. ↳ Screenshot
On the first run of the Reddcoin Core client, it will ask for a data directory to store the blockchain and wallet data.
Start the Reddcoin Core client: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ Screenshot
The welcome screen will appear and ask you about the data directory. I suggest a new folder on your USB drive, I picked blockchain. The directory will be created with all the necessary files. ↳ Screenshot
Click on the three dots (...) on the right. ↳ Screenshot
Click on Create Folder at the upper right corner. Type and enter in the folder name. (In my case: blockchain.) Click on Open. ↳ Screenshot ↳ Screenshot ↳ Screenshot
After selecting the directory, the Reddcoin Core client will start. Wait till it's fully loaded and close it.
Move the bootstrap.dat file to your data directory you selected in the previous step. By doing this, Reddcoin Core will use the bootstrap.dat file to import the blockchain, which speeds up syncing. sudo mv bootstrap.dat /media/rpi3b/usb/blockchain/ (Assuming blockchain as data directory.) ↳ Screenshot
The Reddcoin Core client set up is completed, but you still have to sync fully with the blockchain before you can send, receive and stake.
Keep the client running until it's fully synchronized. It will use the bootstrap file first, and download the rest of the blockchain to complete the sync. This can take some time (it took 2 days for me). Syncing the blockchain uses a lot of resources, so the software may react slow.
You can see the progress in the debug window (Help > Debug window). ↳ Screenshot
When the synchronization is completed, the red (out of sync) will disappear on the Overview screen! ↳ Screenshot
When synchronization is complete, you can start staking your Reddcoins.
You can write down your private key or copy and save it in a document. Make sure you save it somewhere only you can access it.
To import later: Debug window -> Console -> importprivkey [label] [label] is optional. ↳ Screenshot (without a label) ↳ Screenshot (with a label)
Boot with only 1 USB drive plugged in: Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly. If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
Start Reddcoin Core easier Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
Right Click on your Desktop and select Create New -> Empty File. ↳ Screenshot
Enter a file name, make sure it ends with .sh, and click on OK. I've chosen for Reddcoin.sh. ↳ Screenshot The file will be created on your Desktop. ↳ Screenshot
Add the command to start Reddcoin to the file.
Right click on the file, select Leafpad (to open the file in a text editor). ↳ Screenshot
Add the following to the file and save the file: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ Screenshot
To be able to execute the shell script (.sh), it has to have 'execute permissions'.
Right click on the file, and select Properties. ↳ Screenshot
Click on the Permissions tab.
For Execute, select Anyone, and click on OK. ↳ Screenshot
To start Reddcoin Core, double click on the file. A new window will pop-up, asking you what you want. Execute in Terminal is what we want, so you can click on enter. ↳ Screenshot Reddcoin Core will now start. Do not close the Terminal window, you can minimize it if needed.
Minimization options Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
Activate 'Minimize on close'. Settings -> Options... -> Window (tab) -> Minimize on close. ↳ Screenshot Reddcoin will still run when you click on the X button. To close/exit Reddcoin, right click on the Reddcoin icon in the system tray (bottom right corner). ↳ Screenshot
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
After your download is finished, open the file and click Install Package. ↳ Screenshot
To run the VNC Connect once:
Open [Menu] > Run, and enter: vncserver-x11 ↳ Screenshot
To auto run on startup:
Open Default applications for LXSession ([Menu] > Preferences > Default applications for LXSession). ↳ Screenshot
In LXSessions configuration, select Autostart in the menu left.
Under Manual autostarted applications, enter vncserver-x11 and click on + Add. ↳ Screenshot ↳ Screenshot
Reboot your Raspberry Pi and check if VNC Connect is started automatically after the reboot.
When VNC Connect is running, you'll see a VNC icon on the right bottom corner. Double click the icon to open VNC Connect and to see the IP address you need to enter to connect to your Raspberry Pi. ↳ Screenshot
Hi, I run Bisq 1.1.7 (and before it's predecessor with the same problem) on my linux box, and I have problems connecting to my local bitcoind. The log says: Oct-12 21:33:59.240 [PeerGroup Thread] INFO o.b.c.PeerGroup: Attempting connection to [127.0.1.1]:8333 (0 connected, 1 pending, 1 max) Oct-12 21:33:59.241 [NioClientManager] INFO o.b.n.NioClientManager: Connected to /127.0.1.1:8333 Oct-12 21:33:59.241 [NioClientManager] INFO o.b.core.Peer: Announcing to /127.0.1.1:8333 as: /bitcoinj:0.14.7.bisq.1-SNAPSHOT/Bisq:1.1.7/ Oct-12 21:33:59.241 [NioClientManager] INFO o.b.core.Peer: [127.0.1.1]:8333: Got version=70015, subVer='/Satoshi:0.18.1/', services=0x1037, time=2019-10-12 21:33:59, blocks=599090 Oct-12 21:33:59.241 [NioClientManager] INFO o.b.c.PeerGroup: [127.0.1.1]:8333: New peer (1 connected, 0 pending, 1 max) Oct-12 21:33:59.242 [NioClientManager] INFO o.b.c.PeerGroup: Setting download peer: [127.0.1.1]:8333 Oct-12 21:33:59.242 [NioClientManager] INFO o.b.c.l.DownloadProgressTracker: Chain download switched to [127.0.1.1]:8333 Oct-12 21:33:59.287 [NioClientManager] INFO o.b.c.PeerGroup: [127.0.1.1]:8333: Peer died (0 connected, 0 pending, 1 max) Oct-12 21:33:59.287 [NioClientManager] INFO o.b.c.PeerGroup: Download peer died. Picking a new one. Oct-12 21:33:59.288 [NioClientManager] INFO o.b.c.PeerGroup: Unsetting download peer: [127.0.1.1]:8333 Oct-12 21:33:59.288 [PeerGroup Thread] INFO o.b.c.PeerGroup: Waiting 1000 msec before next connect attempt to [127.0.0.1]:8333 The GUI shows the "connected peer" flickering on and off, the status line on the bottom shows "Bitcoin network peers: [0/1]" flickering between 0 and 1, and the radiobuttons for selecting a bitcoind greyed out, so I can't edit anything in the GUI. I tried the --rpcXXXX commandline options with no change. My node is fully synced and not pruned. netstat shows: tcp 0 0 127.0.0.1:833126.96.36.199:* LISTEN 8542/bitcoin-qt tcp 0 0 0.0.0.0:833188.8.131.52:* LISTEN 8542/bitcoin-qt with 8332 being the rpc port. Any ideas?
The core developers are pleased to present the 184.108.40.206 Elizabeth milestone leisure release. This is a leisure release primarily aimed at non-mandatory items and bug fixes leading up to the Fern mandatory milestone release. This release also enables us to whitelist teams other than Gridcoin as a stepping stone for the implementation of no team requirement in Fern. Enjoy! https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/220.127.116.11 Changelog...
Add freedesktop.org desktop file and icon set #1438 (@a123b)
Update bitcoin-qt ubuntu. I cannot get to "My Stats" on Monero / XMR It did not work last week, so I put in a ticket, ..Other cryptocurrency (BTC, ETH, ETC, REP) deposits will normally be deposited..Been reading the latest Coinbase “ Bitcoin Core 0.15.0.1” release info (Oct 2017) - extract below from the Release Notes : If it shows some progress the it is syncing and be patient while it does. But if the number of processed blocks doesn’t change for a long period of time then your wallet is stuck. If that is your case then here are few ways to troubleshoot an out of sync qt wallet. Wallet not syncing – Troubleshooting an out of sync QT wallet Bitcoin Qt Not Syncing. Help Speed up Bitcoin QT wallet syncing by seeding Torrent file . Sep 22, 2018 - Bitcoin's state gets synchronized bitcoin qt not syncing bitcoin mining legal in philippines by everyone downloading the blockchain and applying all transactions in the correct order.! Bitcoin Core can be extremely slow to sync the whole blockchain, and needs outrageous amount of storage space. Most of us have fast drives but with not enough space to put the whole chain on it and a bigger drive, but with poor performance. For this case I have a solution for you. I just downloaded Bitcoin-QT and requested money on an address through the "Receive" tab. My friend sent it and it's not showing up since Bitcoin is taking too long to sync. My Internet connection is really fast and downloads at 100 MBPS.
Here I walk through how to repair and resync a PIVX Qt wallet that won't sync with the blockchain. Purchase a Ledger Nano S: https://www.ledgerwallet.com/r/a... Just to show how Bitcoin Core Wallet after done sync 100% ... How to Repair a Qt Wallet that won't Sync. - Duration: 7:21. Crypto Command 4,846 views. 7:21. ** This is not financial advice and these are simply my opinions, as such, this should not be treated as financial, trading or otherwise investment advice.** Category People & Blogs Installed Bitcoin on my network. Helping the cause. Will be mining for BTCs. ... How to Repair a Qt Wallet that won't Sync. - Duration: 7:21. Crypto Command 4,947 views. 7:21. 👳 Bitconnect QT Wallet on 🍏MAC - NOT SYNCING - FIX!!! 👳 🔓 - Duration: 14:15. ... Bitcoin Crash, Anti-Bearish Coalition, Investments Microsoft US 18,459 watching. Live now;